Feed your amps the right signals in your 2-way system In a 2-way audio system, the mids and highs get the high-pass signal while the subwoofer gets bass. You amplify each signal separately, resulting in greater power handling and sonic clarity. AudioControl’s 2XS 2-way crossover uses a steep 18 dB per octave slope to separate the high and low frequencies, along with a built-in line driver that’ll beef up the signal so your amplifiers will have something clean and powerful to work with. High- and low-pass filters The 2-way crossover features one set of inputs and two sets of outputs: high-pass and low-pass. You can change the preset 90 Hz crossover point by installing another AudioControl module, or by modifying the module installed in your 2XS. A built-in filter removes subsonics from your signal so your amps and subs will play more efficiently. Simple to set up and adjust Once connected, the 2XS makes it simple to attain a strong and balanced signal for your amplifier – you adjust the levels for 1-volt or 3-volts minimum RMS output and for smooth-sounding response. Balanced inputs reject noise caused by your vehicle’s electrical system, but internal switching gives you other options for dealing with ground loops.