Product features

  • Filters dust and pollen ranging from 5-100 microns to dramatically improve in-vehicle air quality.
  • 28 pleats provide more surface area which helps remove road dust, pollen, small particles more efficiently.
  • Car air filter contains activated carbon and soda help absorb odors and generate fresh breeze air.
  • Replacement for FRAM CF10134, Honda Genuine part # 80292-SDA-A01, 80292-SDC-A01, 80292-SEC-A01, 80292-SHJ-A41, 80292-SWA-A01, 80292-T0G-A01, 80292-TZ5-A41. ( Enhanced HVAC performance, recommended replacement every 12 months or 12,000 miles. )
  • Compatible Auto List: ACURA: CSX (2007-2011), ILX (2013-2018), MDX (2007-2018), RDX (2007-2018) , RL (2005-2012), RLX (2014-2018), TL (2004-2014), TLX (2015-2018), TSX (2004-2014), ZDX (2010-2013). HONDA: Accord Crosstour (2010-2011), Accord (2003-2018), CR-V (2007-2016), Civic (2006-2015), Croostour (2012-2015), Odyssey (2005-2017), Pilot (2009-2018), Ridgeline (2006-2018). NOTE: Some models may not be standard equipment on DX, EX and Base models.

Product Description

Compatible model and year list:

HONDA: Accord Crosstour (2010-2011), Accord (2003-2018), CR-V (2007-2016), Civic (2006-2015), Croostour (2012-2015), Odyssey (2005-2017), Pilot (2009-2018), Ridgeline (2006-2018).

ACURA: CSX (2007-2011), ILX (2013-2018), MDX (2007-2018), RDX (2007-2018) , RL (2005-2012), RLX (2014-2018), TL (2004-2014), TLX (2015-2018), TSX (2004-2014), ZDX (2010-2013);

NOTE: Some models may not be standard equipment on DX, EX and Base models.

 

Product description:
Outside air flowing through the vehicle’s ventilation system can expose passengers to road dust and pollen. Kootek Cabin Air Filters can filter these contaminants (particles ranging from 5-100 microns) to help improve the in- vehicle air for driver and passengers, as well as enhancing ventilation system. Each Kootek Cabin Air Filter contains active carbon and soda woven into the filter to absorb odors and freshen the air.

Installation:
1.Open the glove compartment
2.Pull the arm free from the glove compartment
3.Press inward on the sides of the glove compartment to disconnect the stops.
4.Slide the filter frame out from the housing
5.Remove the old filter from the frame carefully
6.Install the new filter in the frame and make sure the direction of air flow is the same as the arrow on the side of filter indicates.
7.Slide the frame back into the housing and make sure it snaps securely
8.Close the glove compartment while pressing inward on the sides to reconnect the stops
9.Re-attach the dampener arm
10.Re-install the Phillips head screw. Close the glove compartment.

Read more
Learn what other customers say about this product Read more